Writable Wall’s Dry Erase Paint
These are partial directions. Read and follow complete instructions that accompany the product.
The existing paint/substrate layer must be dry and cured. Use safety measures to include, but not limited to, breathing and dust masks, disposal materials, safety precautions. Apply in a well ventilated room. This is a paint product, follow proper procedures for applying paint in the locality where the installation occurs.
Allow product to achieve room temperature for 24 hrs before installing.
1. Prep the existing surface to be smooth and clean of dust, debris, grease, wax, polishes and foreign matter. Follow proper containment for any sanding. Use painter’s tape to mark and specify paint area.
2. Smoothly stir product in original container and pour into a clean paint tray liner or unlined metal container. Keep product container covered when not dispensing.
3. Apply with a paint brush, sponge roller or low nap, zero lint roller. Apply a smooth heavy coat covering the entire area. Apply a subsequent coat(s) after three hours (dry to touch) if necessary. One quart should cover 60 square feet (3 mil thickness). Surface will have a glossy, transparent finish that may appear a muted hue over certain surfaces.
4. Clean-up with mineral spirits or paint thinner. Use manufacturer’s safety and use instructions. Clean up materials and Dry Erase Paint product disposal is accordance with local, state, and other regulations.
Writable Wall Coverings offers a Dry Erase Eraser that works best on your new dry erase paint surface.
Dry erase use in 12 hours. Permanent Marker and Regular Marker use at 7 days.
These are partial directions. Read and follow complete instructions that accompany the product.
The existing paint/substrate layer must be dry and cured. Use safety measures to include, but not limited to, breathing and dust masks, disposal materials, safety precautions. Apply in a well ventilated room. This is a paint product, follow proper procedures for applying paint in the locality where the installation occurs.
Allow product to achieve room temperature for 24 hrs before installing.
1. Prep the existing surface to be smooth and clean of dust, debris, grease, wax, polishes and foreign matter. Follow proper containment for any sanding. Use painter’s tape to mark and specify paint area.
2. Smoothly stir product in original container and pour into a clean paint tray liner or unlined metal container. Keep product container covered when not dispensing.
3. Apply with a paint brush, sponge roller or low nap, zero lint roller. Apply a smooth heavy coat covering the entire area. Apply a subsequent coat(s) after three hours (dry to touch) if necessary. One quart should cover 60 square feet (3 mil thickness). Surface will have a glossy, transparent finish that may appear a muted hue over certain surfaces.
4. Clean-up with mineral spirits or paint thinner. Use manufacturer’s safety and use instructions. Clean up materials and Dry Erase Paint product disposal is accordance with local, state, and other regulations.
Writable Wall Coverings offers a Dry Erase Eraser that works best on your new dry erase paint surface.
Dry erase use in 12 hours. Permanent Marker and Regular Marker use at 7 days.
Dry Erase Plus Dry Erase Skins
Allow product to achieve room temperature for 24 hrs before installing.
1) The existing paint/substrate layer must be dry and cured. Clean, smooth, and lightly mark (using an erasable pencil, tape, or laser line) the wall surface where the top or bottom of the surface will be applied.
2) For Painted Surfaces: Lightly mist 1 linear foot of the cured painted surface with a wall cleaner (like Fromula 409). For Smooth, Non-Painted, Surfaces (chalkboards, dry erase boards, metal, Plexiglas, glass, etc.): Heavily mist ~2 1/2 linear feet of the non-painted surface with an ammonia glass cleaner (like Windex with Ammonia-D or Plexiglas cleaner for Plexiglas).
Peel back about 10 inches of the release liner. Press the adhesive-exposed surface to the dampened area. Slowly pull a cloth covered, wet tipped, squeegee over the surface removing any moisture under the dry erase surface. Continue peeling back ~12 inches at a time, spray and squeegee until length is applied. Then, using a soft cotton cloth, fimly press the surface onto the wall/board. A 4' x 14' area takes approx. 25 minutes when one individual holds the unapplied roll of material and another individual applies the product.
3) Trim any excess width or length, wipe down the surface with a water wet cotton cloth, and buff dry.
4) The surface is ready to use. Enjoy!